EGOCHS - Heat Shrinking Tapes
EGOCHS are flame-retardant (3:1 shrink ratio) polyolefin sleeves used for wire identification. The tubing meets the performance requirements of MIL-DTL-23053/5 classes 1 & 3. The identification marks are permanent immediately after printing and remain legible even when exposed to solvents, fuels and oils. The printed tubing meets the mark permanence requirements of MIL-M81531 and MIL-STD-202 both before and after shrinking. The sleeves are low profile and lightweigh. They may be used to provide strain relief and insulation in addition to identification. They are available in 3 widths (9, 12 and 19 mm).

EGOCNA - Non Adhesive Tapes
EGOCNA is a 180 µm polypropylene tape material with a topcoat specifically formulated for thermal transfer printing. EGOCNA is designed to be used as an insert for label holders for wire and cable marking, patch panels, module marking...

EGOCNY - Flexible Nylon Tapes
White or yellow nylon coated fabric tape for thermal transfer printing. It is formulated with a permanent acrylic adhesive and is mainly used for identifying electrical cables and wires (flagging and wrapping) as well as to adhere to curved surfaces. It is not recommended for outdoor usage. This tape is halogen free.

EGOCPO - Polyester Tapes
It is a white, metal or transparent polyester tape for thermal transfer printing. It is formulated with a permanent acrylic adhesive and is mainly used for inventory marking as well as for adhesion onto rough surfaces. It can be recommended for outdoor usage. This tape is halogen free.

EGOCVI - Vinyl Tapes
EGOCVI is a colored vinyl tape formulated with a permanent acrylic adhesive and a topcoat specifically for thermal transfer printing. Colored vinyl tape is mainly used for general labeling (patch panels, electrical panels, datacom racks, ...) and asset labeling. The vinyl tape exists in five different colors: white, yellow, orange, red